How to disassemble the outer tooth slew bearing? How to install it?

/in /by

As a key component in the mechanical system, the performance and life span directly affect the stable operation of the entire device. After a long period of use, disassembly and maintenance may be required to ensure its normal work. This article will in -depth discussions on how to disassemble the bearing of the external tooth turntable, dismantle the process, and provide detailed steps and key precautions to help readers better understand and handle this key mechanical component.

1. How to disassemble the outer tooth turntable bearing

1. Preparation

Before the disassembly operation is performed, it must be fully prepared. This includes understanding the disassembly drawings of the device, preparing the necessary tools and materials to ensure that it can be carried out quickly and safely during the disassembly process. At the same time, close the equipment power and ensure that the equipment is in a safe state.

2. Disassembling steps

Remove external parts

According to the disassembly drawings, the external parts are gradually removed, such as the outer cover and the connection bolt. Use appropriate tools to ensure cautious operation to prevent damage to parts.

Separate internal and external circles

Through the appropriate tools, gradually separate the internal and external circles. Pay attention to check whether there are foreign bodies or dirt in the circle, which may be one of the causes of bearing failure.

Take out the roller and keep the shelf

Take the roller and keep it carefully. Checking whether their surface is abnormal wear or damage, which is essential for subsequent maintenance and replacement.

Clean and check

After disassembly, cleaning various parts, especially inner and outer circles, rollers and holders. Use the cleaner to remove the fat and dirt, and wipe it clean with a clean cloth.

Measurement size and gap

Use the measurement tool to accurately measure the size and gaps of each component. This helps evaluate the degree of wear of the bearings and decides whether to replace parts.
Bearing
2. How to install the outer tooth turntable bearing

1. Lubrication and assembly

Properly lubricate all components before reasonsment. Choose proper lubricating fat or oil to ensure that the external tooth rotor bearing can run smoothly during work.

2. The assembly process

According to the reverse order of disassembly, gradually assemble the external tooth turntable bearing. Make sure that each component is installed correctly, the bolt is in moderate tightening, and it is too tight or loose.

3. Function test

After the assembly is completed, the functional test is performed to ensure that the external tooth rotor bearing can rotate freely without abnormal sound and vibration.

Regarding how to disassemble the external tooth rotor bearing, you already know it. By removing the external tooth turntable bearing and maintenance, we can extend its service life and improve the reliability of the equipment. In this process, be sure to operate carefully to ensure that each step meets relevant standards and requirements. Only in this way can we better protect and maintain this key mechanical component to ensure that the equipment runs for a long time and quickly.

Explanation of the installation method of large -scale slew bearing

/in /by

Large -scale rotating slewing  bearing is an important structural component in construction machinery, which is widely used in excavators, cranes, wind power equipment and other fields. Correct installation is critical to ensure the normal operation of the bearings and the stability of the equipment. This article will introduce the installation method of large -scale rotation branches in detail to ensure the reliable operation of the equipment.

The installation method of large -scale slewing  bearing

1. Preparation:

Before the installation of large -scale rotation slewing  bearing , we must first prepare for. This includes cleaning the mixed objects on the installation base and the support base, checking the bearing and its components whether it is intact, as well as the tools and equipment you need to prepare.

2. Install the base:

Before starting the bearing installation, the base of the device must be installed correctly. The horizontal and peaceful integration of the base is essential for the normal operation of the bearings. The base is accurately adjusted through the horizontal meter and measurement tools to ensure the flat and horizontal level.

3. Install the slewing  bearing :

Before installing bearings, the installation position of the bearing and base needs to be marked to ensure that the bearings can be accurately installed on the device. Then use the lifting equipment to slowly hang the bearings to the base, and ensure that the center of the bearing is consistent with the center of the base.
Large -scale rotary branches of bearing 4. Connection drive device:

According to the actual situation of the device, connect the bearings and transmission devices. This may involve the correct installation of transmission elements such as gears and chains to ensure that the transmission system is coordinated with the bearing to achieve normal operation of the equipment.

5. Install a sealed device:

Large -scale slewing  bearing is usually equipped with a sealing device to prevent external debris from entering the bearing inside and protecting the bearing. After the bearing installation is completed, the sealing device is properly installed according to the design requirements to ensure that the sealing performance meets the requirements.

6. Adjust the bearing gap:

Large -scale slewing  bearing needs to be adjusted appropriately during the installation process to ensure that the internal gap of the bearings meet the design requirements. By rotating bearing and adjusting according to the actual situation, you usually need to carefully monitor the operation of the bearings.

7. Check the lubrication system:

Ensuring the normal operation of the lubrication system of the bearing is an important part of the bearing installation. Check the lubrication system, including oil pipes, oil pumps and other components, to ensure that lubricating oil can smoothly flow into the bearings and provide good lubrication.

8. Trial transportation:

After completing the above steps, testing is a step to ensure whether the bearing installation is successful. In the trial movement, carefully observe the operation of the bearings and check whether there are abnormal noise, vibration or temperature rise. Make sure that the equipment meets the design requirements in the trial operation.

Overall, the installation method of large -scale rotation support bearing requires experienced technical personnel to operate. In actual operation, according to the models and requirements of the specific equipment, combined with relevant drawings and technical specifications, the installation steps are carefully executed to ensure the safety, stable and reliable operation of the bearings, so as to provide a solid foundation for the normal work of engineering machinery.

What are the effects of turntable bearing?

/in /by

The turntable bearing is a crucial technology in the field of mechanical engineering. It carries the weight of rotating parts and allows the mechanical system to operate smoothly. This simple and precise device plays a key role in all walks of life. From industrial machinery to household appliances, it is everywhere. This article’s turntable bearing manufacturer will further explore the role of turntable bearing and its importance in modern society.

What are the effects of turntable bearing?

1. Industrial manufacturing

The turntable bearing plays an indispensable role in industrial manufacturing. Among heavy machinery, such as wind turbines, aviation engines, and construction machinery, huge stress needs to be reliable to support, which is the place of martial arts for turntable bearing. They are designed to bear high -speed rotation and large torque to ensure the smooth operation of mechanical equipment. The use of turntable bearing enables these huge mechanical systems to operate quickly, improve production efficiency, and contribute to the development of the industrial field.

2. The field of transportation

The turntable bearing also played a key role in the field of transportation. From cars to trains to planes, whether it is land, ocean or air transportation, they need complex mechanical systems to ensure safe and stable operation. The turntable bearing plays a supporting and guiding role in key components such as wheels, aircraft engines and ship propellers. By reducing friction and rotating efficiency, the turntable bearing makes the transportation more energy saving and reliable, and provides the foundation for the rapid transportation system of modern society.
Transit Bearing 3. Home Electric and Office Equipment

In addition, turntable bearing is also widely used in home appliances and office equipment. From household fans to computer hard disk drives, turntable bearing has played a key role in support. Among these small devices, they guarantee the smooth operation and long life of the equipment. The rotor bearing can be critical to the stability and reliability of these electronic equipment, so they become an indispensable part of modern life.

4. The field of aerospace medicine

In addition, with the continuous development of technology, the turntable bearing has also played an increasingly important role in the fields of aerospace, medical equipment and robotics technology. In the precision operation of the aerospace navigation system and equipment and the joint structure of the robot, the turntable bearing has played key support and guidance, so that these advanced technologies can be realized.

In general, although the turntable bearing appears small in the mechanical system, it plays a huge role in all aspects of modern society. They support the development of industrial manufacturing, transportation, household appliances and high -tech fields, and provide a solid foundation for social progress and convenience. Therefore, the turntable bearing can be regarded as a silent supporter in the mechanical field, and their existence provides more convenient and advanced lifestyle for humans.